Step by Step Guide To DIY Vinyl Flooring Installation

Vinyl flooring has become a popular choice for homeowners due to its durability, versatility, and easy maintenance. If you’re looking to upgrade your floors and want to save money by installing it yourself, this step-by-step guide will walk you through the process of DIY vinyl flooring installation. With careful preparation and attention to detail, you can achieve professional-looking results that will enhance the beauty and functionality of your home.


Pre-Installation Preparation


Before you begin the installation process, it’s important to first properly assess the advantages and disadvantages of vinyl floors, and whether or not it is for you. This understanding will guide you through the entire installation process. After that, start by removing any existing flooring and ensuring that the subfloor is clean, dry, and level. This preparation is crucial, as it provides a smooth and stable surface for the vinyl flooring.


Gather Necessary Tools And Materials

To successfully install vinyl flooring, you’ll need a few essential tools and materials. These include:

  • Vinyl flooring: Measure your space accurately to determine the amount of vinyl flooring needed. Consider purchasing a little extra to account for any mistakes or future repairs.
  • Utility knife: A sharp utility knife will be your best friend throughout the installation process. Use it to cut the vinyl flooring to the appropriate size and shape.
  • Tape measure: Accurate measurements are crucial for a seamless installation. Take your time to measure the dimensions of your room and any obstacles.
  • Trowel: A trowel will be used to spread adhesive evenly on the subfloor.
  • Roller: A roller will help ensure proper adhesion of the vinyl flooring to the subfloor.
  • Notched trowel: This tool is essential for spreading adhesive on the subfloor. The notches in the trowel help create an even layer of adhesive.
  • Level: A level will help you ensure that your subfloor is perfectly flat before installation.
  • Safety goggles and gloves: Protect your eyes and hands while working with tools and materials.


Measure Vinyl Flooring Amount


The most common mistake to avoid during DIY vinyl flooring installation is neglecting accurate measurements of the installation area. Precise measurements are crucial for purchasing the correct amount of vinyl flooring. Calculate the square footage by multiplying the room’s length and width measurements.


Prepare Subfloor

When installing the vinyl flooring, it’s crucial to properly prepare the subfloor. Ensure that there is no debris, nails, or staples, as these factors affect the duration of the vinyl floor installation. Fill any cracks or holes with a suitable patching compound and allow it to dry completely. Sand down any high spots and use a level to ensure the subfloor is flat and smooth. This preparation will guarantee a seamless and durable vinyl flooring installation.


Plan Vinyl Flooring Layout


Planning the layout of your vinyl flooring is an important step that will determine the overall aesthetic and functionality of your space. Start by finding the center of your room and marking it with a chalk line. This will serve as your starting point for laying the vinyl flooring. Along with planning the layout, it is also important to know the different types of vinyl flooring, and to carefully decide on which is right for your home.


Install Vinyl Flooring


Now that you’ve completed the pre-installation preparation and planning, it’s time to install the vinyl flooring. Ultimate guide to DIY vinyl floor installation:

Install First Row

  • Apply adhesive: Using a notched trowel, spread adhesive on the subfloor starting at the centerline. Work in small sections to ensure the adhesive doesn’t dry before you lay the vinyl planks.
  • Lay the first plank: Place the first vinyl plank at the starting point on the adhesive. Press it firmly into place, ensuring it aligns with the chalk line and is snug against the wall.
  • Continue laying the first row: Lay the remaining planks in the first row, connecting the tongue and groove edges as you go. Use a tapping block and rubber mallet to ensure a tight fit between planks.
  • Trim the last plank: Measure and cut the last plank in the first row to fit, leaving a 1/8-inch gap between the plank and the wall to allow for expansion.

Install Subsequent Rows

  • Apply adhesive: Spread adhesive on the subfloor, working in small sections as before.
  • Connect the planks: Lay the first plank of the second row, connecting the tongue and groove edges with the first row. Use a tapping block and rubber mallet to ensure a tight fit.
  • Continue laying subsequent rows: Repeat the process of applying adhesive and connecting the planks row by row until you reach the opposite wall.

Install Baseboards And Trim

  • Install baseboards and trim after laying all vinyl flooring planks.
  • Measure and cut baseboards to fit precisely against the vinyl flooring.
  • Secure baseboards to the wall using finishing nails or adhesive.
  • Add quarter-round trim to cover the expansion gap between flooring and wall.


Check For Loose Areas

After installing the vinyl flooring, it’s essential to check for any loose areas or gaps between the planks. Walk across the floor and press down on any areas that feel loose or have visible gaps. If necessary, apply additional adhesive to avoid the need for vinyl floor replacement.


Clean Your Vinyl Flooring


After completing the installation, it’s crucial to clean your vinyl flooring to eliminate any adhesive residue or dirt. Use a mixture of mild detergent and water with a soft mop or cloth to gently clean the surface. Avoid abrasive cleaners or tools that may cause damage to the vinyl flooring. Making use of these maintenance and cleaning tips for vinyl flooring will help preserve the appearance of your flooring for years to come.


Contact FloorCube Singapore for Professional Vinyl Flooring Services

While DIY vinyl flooring installation can be a rewarding project, it may not be suitable for everyone. If you prefer to leave the job to professionals, consider contacting FloorCube Singapore for professional vinyl flooring services. Our team of experienced installers can ensure a seamless and hassle-free installation, saving you time and effort.



There are several benefits of installing vinyl flooring, from its durability and easy maintenance to cost-effectiveness and eco-friendliness. It isa cost-effective way to upgrade your home’s floors while adding style and durability. By following this step-by-step guide, you can successfully complete a DIY vinyl flooring installation. Remember to properly prepare the subfloor, plan the layout, and take accurate measurements for a smooth and professional-looking finish. Whether you choose to tackle the project yourself or enlist the help of professionals, consider vinyl flooring, as the recommended choice for your home.


Floorcube Singapore is the premier choice for individuals seeking top-notch flooring solutions and decking solutions. We specialise in delivering high-quality and visually captivating flooring for both residential and commercial spaces, specifically vinyl flooring, parquet flooring, and wood flooring. We firmly believe that visually appealing flooring should be accessible to all. We also provide decking services including balcony decking, and timber decking.

Our team of highly skilled professionals strives for meticulous installation, aiming to achieve excellent and long-lasting outcomes. Recognizing the challenges of choosing the perfect flooring, our staff is always there to guide you through the process and offer personalized recommendations. Explore our articles and projects for an extensive view of our services. For any inquiries or additional assistance, please feel free to contact us via WhatsApp at +65 8241 0032. Our dedicated team is eager to promptly and efficiently address your flooring and decking needs.